Promise Technology VessRAID 1720i Product Manual Download

Page: 111 / 354

Chapter 4: Management with WebPAM PROe

Managing the Controller

The RAID controller is the heart of the VessRAID subsystem. Controller
management includes the following functions:

•

Viewing Controller Information (page 95)

•

Viewing Controller Information (page 95)

•

Viewing Controller Statistics (page 96)

•

Making Controller Settings (page 96)

•

Clearing an Orphan Watermark (page 97)

Viewing the Controller

To view information about the controller:

Click the Subsystem

icon in Tree View.

Click the Controllers

icon.

The controller information appears under the Information tab in Management
View. Controller information includes:

•

Controller ID – 1

•

Alias – if assigned

•

Model – if applicable

•

Status – OK means normal

Viewing Controller Information

To view Controller information:

Click the Subsystem

icon in Tree View.

Click the Controllers

icon.

Click the Controller

icon.

The controller information appears the Information tab in Management View.

Adjustable items

You can set or adjust the following items:

•

Alias, if assigned

•

Coercion, enable or disable

•

Coercion Method

•

SMART (Self-Monitoring, Analysis, and Reporting System for physical
drives)

•

SMART Polling Interval

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands