manualshive.com logo in svg

Promise Technology VessRAID 1720i, Product Manual

Share
Download
Promise Technology VessRAID 1720i Product Manual Download Page 204

VessRAID 1000i Series Product Manual

188

Working with LUN Mapping

LUN Mapping includes the following functions:

•

Viewing a List of Initiators (page 188)

•

Enabling LUN Mapping (page 188)

•

Creating an Initiator (page 188)

•

Mapping a LUN to an Initiator (page 189)

•

Deleting an Initiator (page 189)

Viewing a List of Initiators

LUN Mapping must be enabled in order for VessRAID to recognize an iSCSI 
initiator.

To view a list of initiators:

1.

From the Main Menu, highlight Additional Info and Management and press 
Enter.

2.

Highlight LUN Mapping and press Enter.

A list of the current initiators appears.

Enabling LUN Mapping

To enable LUN mapping:

1.

From the Main Menu, highlight Additional Info and Management and press 
Enter.

2.

Highlight LUN Mapping and press Enter.

A list of the current iSCSI initiators appears.

LUN Mapping must be enabled in order for VessRAID to recognize the initiator. If 
LUN Mapping is currently disabled, highlight Enable LUN Mapping and press 
Enter.

Creating an Initiator

You must add an initiator to the VessRAID’s initiator list in order to use the 
initiator to create a LUN.

To create (add) a new initiator:

1.

From the Main Menu, highlight Additional Info and Management and press 
Enter.

2.

Highlight LUN Mapping and press Enter.

3.

Highlight Create New Initiator and press Enter.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands