Promise Technology VessRAID 1720i Product Manual Download Page 199

Page: 199 / 354

Chapter 5: Management with the CLU

183

Deleting CHAPs

To delete a CHAP:

From the Main Menu, highlight iSCSI Management and press Enter.

Highlight iSCSI CHAPs and press Enter.

Highlight the CHAP you want to delete and press the spacebar to mark it.

Highlight Delete Marked Entries and press Enter.

Press Y to confirm.

Using iSCSI Ping

You can send a ping through VessRAID’s iSCSI data ports to verify a network
connection.

To send a ping:

From the Main Menu, highlight iSCSI Management and press Enter.

Highlight Ping and press Enter.

Highlight IP Address and type the IP address you want to ping.

Highlight Ping Through and press the spacebar to toggle though port
numbers to choose an iSCSI data port.

Highlight [Ping] and press Enter to send the ping.

The result of the ping displays on the screen.

To clear the result, highlight Return to Previous Menu and press Enter twice.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Brands by name

Popular brands