Promise Technology VessRAID 1720i Product Manual Download

Page: 203 / 354

Chapter 5: Management with the CLU

187

To display NVRAM events:

From the Main Menu, highlight Event Viewer and press Enter.

Highlight NVRAM Events and press Enter.

The log of NVRAM Events appears. Events are added to the top of the list.
Each item includes:

•

Sequence number – Begins with 0 at system startup.

•

Device – Disk Array, Logical Drive, Physical Drive by its ID number.

•

Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal

•

Timestamp – Date and time the event happened.

•

Description – A description of the event in plain language.

Press the up and down arrow keys to scroll through the log.

Clearing NVRAM Events

To clear the Runtime Event log:

From the Main Menu, highlight Event Viewer and press Enter.

Highlight NVRAM Events and press Enter.

Highlight Clear NVRAM Event Log and press Enter.

Press Y to confirm.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands