Promise Technology VessRAID 1720i Product Manual Download

Page: 244 / 354

VessRAID 1000i Series Product Manual

228

Managing Spare Drives

Spare Drive Management on the LCD includes:

•

Viewing Spare Drive Information (page 228)

•

Creating a Spare Drive (page 228)

•

Deleting a Spare Drive (page 229)

•

Locating a Spare Drive (page 229)

For other spare drive functions, see “Managing Spare Drives” on page 133 or
“Managing Spare Drives” on page 169.

Viewing Spare Drive Information

To view spare drive information:

Press the

button until the display says Spare Drive Management.

Press the

button and the display a list of spare drives by ID number.

Press the

button to scroll through the list of spare drives.

Press the

button choose a spare drive.

Press the

button to scroll through the list of items:

•

Spare Drive ID Number

•

Physical Drive ID Number*

•

Capacity

•

Revertible – See “Transition” on page 273 for more information.

•

Type – Global (all disk arrays) or Dedicated (to specified disk arrays)

•

Status

* Press the

button to view physical drive information from this point.

Spare Drive Status

•

OK – The normal state of a spare drive.

•

Offline – Not available for use as a spare. Requires corrective action. See
“Physical Drive Problems” on page 306.

Other status conditions involve functions not supported by the LCD panel.

Creating a Spare Drive

Only unconfigured physical drives can be used to make spares. The spare drive
must be the same type of drive, HDD or SSD, as the other drives in disk array.

To create a spare drive:

Press the

button until the display says Array Configure.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands