40
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 12/16
www.promega.com
3.E. Analysis of Results (continued)
‘Templates’ Screen Functions
The functions present on the ‘Templates’ screen allow users to
Export
,
Remove
,
Import
and create a
New
Template
. Each of these functions is described below and shown in Figure 46.
1.
Exporting a Template
Analysis templates that have been created by a user can be exported from the GloMax
®
software and imported into
the GloMax
®
software on another PC. The exported file has a .package extension. Export existing analysis
templates by performing the following steps:
a. From the ‘Home’ screen, touch the
Results
button.
b. On the left side of the ‘Protocols Execution Results’ screen, touch the
Templates
button.
c. Touch the checkbox(es) on the right side of the analysis template(s) that you wish to export. You can use
the checkbox in the header of the table to select/deselect all displayed analysis templates. When analysis
template(s) have been selected, the
Export
button near the bottom left side of the screen will become
active.
d. Touch
Export
to create an export .package file. All exported files will be saved in the subfolders
Analysis\Templates within the export path specified by the administrator and have the date and time of
the export appended to the analysis template name. If a single analysis template was selected, the file
name will be the same as the analysis template name. If multiple analysis templates were selected, the
file will have the name Templates.