22
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 12/16
www.promega.com
3.C. Protocol Screen (continued)
F
11632T
A
igure 18. GloMax
®
Discover ‘New Protocol’ screen showing a step added to the protocol.
4.
Select filters, integration times and plate map (see below) as you build the protocol.
5.
Rearrange steps by dragging and dropping as desired.
6.
Delete steps by selecting the black
X
in the top right corner of the step.
7.
Save the protocol by selecting either the
Save
or
Save As
button on the bottom right corner of the screen. A
user message will appear indicating that the protocol was saved successfully.
F
11633T
A
igure 19. GloMax
®
Discover New Protocol Successfully Saved user message.
Plate Maps
There are two ways to select a plate map for the measurement. The default is to apply the plate map to all steps
within a protocol. In the upper right corner of the protocol, the user can lock or unlock the plate map. When
locked (which is the default), the plate map is applied to each step of the protocol.
When the plate map is applied to each step of the protocol, only the plate map in the upper right corner may be
modified. The plate maps within each step of the protocol are then shaded and cannot be modified.
