Printronix N7000 H-Series, User Manual

Page: 66 / 292

66
Chapter 4
HOST INTERFACE
Auto Save
•
Enable (default). When a change has been made to a Config. menu, this
option automatically prompts the user to save or not save the change to a
Config #.
If you are currently in the Factory Config. menus and make a change,
pressing Enter saves to Config 1 or the next available Config. and
becomes the Power-Up Config. If the Current Config is Config 1 and a
menu change is made, pressing Enter will save the change to Config 1.
•
Disable . The printer will not prompt you to save any changes made.
HOST INTERFACE
The Host Interface Menu enables you to select and configure one of many
types of interfaces between the printer and your host computer. The currently
selected interface is indicated with an asterisk on the control panel message
display. Each interface has its own submenu with a set of interface
parameters which can be configured.
HOST
INTERFACE
(from page 58 and 59)
IEEE 1284 Auto
Switching*
Centronics Dataproducts Serial Ethernet
(see page 79)
(see page 67)
(see page 69) (see page 71) (see page 74)
* = Factory Default