Printronix N7000 H-Series, User Manual

Page: 88 / 292

88
Chapter 4
Line Emulation (N7000 STD)
•
High Speed 64 . This font prints at 120 dpi horizontally and 64 vertically.
When chosen from the front panel, it defaults to
10 cpi. The cpi can then be varied, but the width will not change.
•
BARCODE 145 . This Data Processing font prints at 145 dpi horizontally
and 72 vertically. When chosen from the front panel, it defaults to 12 cpi.
The cpi can then be varied, but the width will not change.
•
BARCODE 160 . This Data Processing font prints at 160 dpi horizontally
and 72 vertically. When chosen from the front panel, it defaults to 13 cpi.
The cpi can then be varied, but the width will not change.
Prop. Spacing (Proportional Spacing)
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
•
Disable (default). Each character cell is printed with the same width.
Each column in the printed text will line up.
•
Enable . The width of each character cell varies with the width of the
character. For example, [i] takes less space to print than [m]. Using
proportional fonts generally increases the readability of printed
documents, which gives text a typeset appearance.
Bold Print
•
Disable (default). Text is printed normally.
•
Enable . Text is printed with a heavy line thickness.
Italic Print
•
Disable (default). Text is printed normally.
•
Forward Slant . Text is printed with a forward slant.
•
Backward Slant . Text is printed with a backward slant.
Slashed Zero
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
•
Disable (default). Zero is printed without a slash.
•
Enable . Zero is printed with a slash.