Printronix N7000 H-Series, User Manual

Page: 290 / 292

290
606 Power 8.5V CHECK message, 209
607 CTL VOLT FAIL * message, 209
608 DRIVER CIRCUIT BAD message, 209
609 EXHAUST FAN CHECK message, 210
613 HAM. COIL BAD Message, 210
614 HAMMER BANK NOT INSTALLED
message, 210
615 HAMMER BANK CHECK Message, 210
617 LOWER DRIVER SHORT* message, 210
619 PAPER FEED DRIVER CIRCUIT*
message, 210
620 POWER VOLT CHECK* message, 210
622 SHUTTLE DRIVER CRCUIT* message, 210
623 STACK FAULT message, 211
624 UPPER DRIVER SHORT* message, 211
625 WRONG E-NET message, 211
700 A TO D OVERUN * message, 211
701 ACCESS NULL POINTER* message, 211
702 FIRMWARE ERROR message, 211
703 ILLEGAL EXTERNAL BUS ACC *
message, 211
704 ILLEGAL INSTRUCTION ACC* message, 211
705 ILLEGAL OPERAND ACCESS * message, 211
706 PAP BAD TABLE* message, 211
707 PAPER BUSY TOO LONG* message, 211
708 PAPER FIFO OVERFLOW* message, 212
709 PAPER FIFO UNDERFLOW* message, 212
710 PAP ILLGL ST* message, 212
711 PAP INCMPL ENER* message, 212
712 PAP INVLD CMD* message, 212
713 PAP INVLD PARM* message, 212
714 PAP NOT SCHED* message, 212
715 PAP NT AT SPEED* message, 212
716 PAP UNEXP INT* message, 212
717 PLAT INV CMD* message, 212
718 PLAT INV PARM* message, 212
719 PLAT INV STATE* message, 212
720 PROTECTED INSTRUCTION* message, 212
721 RIB INVLD CMD* message, 213
723 SHUTL INV CMD* message, 213
724 SHUTL INV PARM* message, 213
725 SHUTL OVER SPEED* message, 213
727 SOFTWARE ERROR* message, 213
728 STACK OVERFLOW* message, 213
729 STACK UNDERFLOW* message, 213
730 TCB CORRUPTED* message, 213
731 UNDEFINED INTERRUPT* message, 213
732 UNDEFINED OPCODE message, 213
733 DP FIFO Busy* message, 214
8.5V PWR FAIL * message, 179