Printronix N7000 H-Series, User Manual

Page: 125 / 292

IGP/PGL Submenu
125
Forms Handling
This submenu allows the user to handle the form in the following ways:
•
Disable (the default). No effect.
•
Auto Eject . Automatically ejects a page at the end of the job to spill out
the last page.
•
Auto TOF . Automatically does a form feed (FF) at the end of each form to
the next top of form.
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when the printer
is powered on.
•
Enable (default). The PGL is enabled when the printer is powered on.
(The PGL feature is initialized in the Normal mode.)
•
Disable . The PGL is disabled when the printer is powered on. (The PGL
feature is initialized to the Quiet mode.)
Ext Execute Copy
•
Disable (default). Dynamic data and overlay data are not allowed if the
optional Form Count parameter (number of forms to print) is specified as
part of the Execute command. (This setting is IGP-100 compatible.)
•
Enable . Only dynamic data is allowed within a form in which the Form
Count parameter is specified in the Execute command. In this case, the
exact same form (with identical dynamic data, etc.) is printed for the Form
Count. However, incremental data is not incremented since the page that
is printing is exactly the same. Also, each form is printed on a separate
page.
Barcode
Options
(from page 122)
UPC
Descenders
Optimized
Ratio
I-2/5
Selection
AI 00
Spaces
Select SO
Char
Always*
Never
Only with PDF
Disable*
Enable
Leading Zero*
Trailing Space
X2 DPD
Modulo 7 CD
Disable*
Enable
14*
(0-255)
* = Factory Default
User-Def
Ratio
Enable*
Disable
C39
Compatbl.
Disable*
Enable