Printronix N7000 H-Series, User Manual

Page: 67 / 292

Auto Switching Submenu
67
Auto Switching Submenu
Auto Switching gives the printer the ability to handle multiple data streams
sequentially. With Auto Switching, the printer can service hosts attached to
the serial, parallel and Ethernet ports as if they were the only interface
connected.
For example, if the host computer sends one print job to the RS-232 serial
port and a separate print job to the IEEE 1284 parallel port, the printer's Auto
Switching is able to handle both jobs, in the order they were received. The
user does not have to reconfigure the selected interface between jobs.
Auto Switching
(from page 66)
Parallel
Hotport Serial
Hotport
Port Type
Centronics*
(see page 69 for options)
Dataproducts
(see page 71 for options)
IEEE 1284
(see page 79 for options)
Disable
Trickle Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
Timeout
10 sec.*
(10-60)
Report Status
Disable*
Enable
Switch Out On
Data Timeout*
Session Close
Port Type
RS 232*
RS 422
Disable
Trickle Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
Timeout
10 sec.*
(10-60)
Report Status
Disable*
Enable
* = Factory Default
Ethernet
Hotport
Timeout
10 sec.*
(10-60)
Switch Out On
Data Timeout
Session Close