Polycom RealPresence 800s Administrator'S Manual Download Page 841

Page: 841 / 867

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator’s Guide

Polycom®, Inc.

855

In the Outbound Proxy Servers table, the Port field must be set to 5061. (The same value as

entered in Step g.)

For more information see the

Polycom Unified Communications Deployment Guide for Microsoft

Environments

Set the

ITP_CERTIFICATION

System Flag

YES

When set to

(default), this flag disables the Telepresence features in the Conference Profile.

Set the

MIN_TIP_COMPATIBILITY_LINE_RATE

System Flag.

The

MIN_TIP_COMPATIBILITY_LINE_RATE

System Flag determines the minimum line rate at

which a Profile can be TIP enabled.
CTS version 1.7 requires a minimum line rate of 1024 kbps and will reject calls at lower line rates,

therefore the System Flag value must be

1024

or higher.

For more information see

Modifying System Flags

If required, manually add and set the

FORCE_720P_2048_FOR_PLCM_TIP

System Flag using

one of the following values:

FORCE_720P_2048_FOR_PLCM_TIP (Default)

- Forces HD 720p video resolution and a line rate

of 2048kbps for all Polycom TIP-enabled endpoints that connect to the TIP-enabled Telepresence

conference. This setting is the recommended setting.

FORCE_2048_FOR_PLCM_TIP

- Forces a line rate of 2048kbps for all Polycom TIP-enabled

endpoints connecting to the TIP-enabled Telepresence conference.

NO_FORCE

- No forcing is applied and Polycom TIP-enabled endpoints can connect to the

TIP-enabled Telepresence conference at any line rate or resolution.

Reset the Collaboration Server.

For more information see .

Polycom Unified Communications Deployment Guide for Microsoft

Environments

, Configure a DMA System SIP Peer for the Lync Server

Summary of Contents for RealPresence 800s




































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RealPresence 800s

Reviews:

Related manuals for RealPresence 800s

Brands by name

Popular brands

Polycom RealPresence 800s, Administrator'S Manual

Search results

Summary of Contents for RealPresence 800s

Reviews:

Related manuals for RealPresence 800s

Brands by name

Popular brands