Polycom RealPresence 800s Administrator'S Manual Download Page 289

Page: 289 / 867

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator’s Guide

Polycom®, Inc.

303

In the

Profile

field, select a Profile in which the

Operator Conference

option is selected.

Upon selection of the

Operator Conference

Profile, the

Display Name

is automatically taken from the

Collaboration Server User

Login Name

. This name cannot be modified.

Only one Operator conference can be created for each User Login name.

Define the following parameters:

New Conference – General Options

Field

Description

Duration

Define the duration of the conference in hours using the format HH:MM (default
01:00).

Notes:

•

The Operator conference is automatically extended up to a maximum of 168
hours. Therefore, the default duration can be used.

•

This field is displayed in all tabs.

Summary of Contents for RealPresence 800s




































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RealPresence 800s

Reviews:

Related manuals for RealPresence 800s

Brands by name

Popular brands

Polycom RealPresence 800s, Administrator'S Manual

Search results

Summary of Contents for RealPresence 800s

Reviews:

Related manuals for RealPresence 800s

Brands by name

Popular brands