RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator’s Guide
Polycom®, Inc.
640
REMOVE_H323_EPC_CAP_TO_
NON_POLYCOM_VENDOR
Used to disable
EPC
protocol. Use of
Polycom’s
proprietary protocol,
High Profile
,
EPC
, may result in interoperability issues when used with
other vendors’ endpoints.
Possible values: YES / NO
Default: NO
REMOVE_H323_HIGH_PROFILE
_CAP_TO_NON_POLYCOM_VE
NDOR
Used to disable
High Profile
protocol. Use of
Polycom’s
proprietary
protocol,
High Profile
, may result in interoperability issues when used
with other vendors’ endpoints.
Possible values: YES / NO
Default:
NO
REMOVE_H323_HIGH_QUALITY
_AUDIO_CAP_TO_NON_POLYC
OM_VENDOR
Used to disable the following
Audio Codecs
:
•
G7221C
•
G7221
•
Siren22
•
Siren14
Possible values:
YES / NO
Default:
NO
REMOVE_H323_LPR_CAP_TO_
NON_POLYCOM_VENDOR
Used to disable
H.323 LPR
protocol. Use of
Polycom’s
proprietary
protocol,
H.323 LPR
, may result in interoperability issues when used
with other vendors’ endpoints.
Possible values:
YES / NO
Default:
NO
REMOVE_IP_IF_NUMBER_EXIS
TS
Between the time a conference is scheduled and when it becomes
active, the IP of an endpoint may change, especially in an environment
that uses DHCP. This flag determines if the
E.164
number is to be
substituted for the IP address in the dial string.
Range: YES / NO
Default: YES - The IP address will be substituted with the E.164
number.
RFC2833_DTMF
Controls the receipt of in-band and out-of-band DTMF Codes. When
set to:
•
YES The RMX will receive DTMF Codes sent in-band.
•
NO The RMX receive DTMF Codes sent out-of-band.
The RMX always sends DTMF Codes in-band (as part of the Audio
Media stream).
Range: YES/NO
Default YES
RMX_MANAGEMENT_SECURIT
Y_PROTOCOL
Enter the protocol to be used for secure communications.
Default: TLSV1_SSLV3 (both).
RTCP_FIR_ENABLE
When set to YES, the
Full Intra Request
(
FIR
) is sent as
INFO
(and not
RTCP
).
Default = YES
Manually Added, Modified, Deleted System Flags
Flag
Description
