manualshive.com logo in svg

Polaris RZR 800 2013, Manual

The Polaris RZR 800 2013 is a powerful and versatile off-road vehicle for adventure seekers. Get the most out of your ride by downloading the free manual from manualshive.com. This comprehensive guide will ensure you have all the information you need to operate your vehicle safely and efficiently.

Share
Download
background image

IX.4

9924707 - 2013–2014

RZR

800 Service Manual

© Copyright 2013 Polaris Sales Inc.

Rear Fenders (RZR / RZR S).................................. 5.17
Rear Fenders (RZR 4) ........................................... 5.18
Rear Gearcase ...................................................... 7.44
Rear Gearcase (RZR S INT’L) ................................ 7.53
Rear Gearcase Lubrication..................................... 2.22
Rear Gearcase, Assembly...................................... 7.48
Rear Gearcase, Assembly (RZR S INT’L) ................ 7.62
Rear Gearcase, Diff Assembly (RZR S INT’L) .......... 7.61
Rear Gearcase, Diff Disassembly (RZR S INT’L)...... 7.60
Rear Gearcase, Disassembly ................................. 7.45
Rear Gearcase, Disassembly (RZR S INT’L) ........... 7.56
Rear Gearcase, Exploded View .............................. 7.52
Rear Gearcase, Exploded View (RZR S INT’L) ........ 7.66
Rear Gearcase, Installation .................................... 7.51
Rear Gearcase, Installation (RZR S INT’L) .............. 7.65
Rear Gearcase, Removal ....................................... 7.44
Rear Gearcase, Removal (RZR S INT’L) ................. 7.54
Rear Service Panel (RZR / RZR S) ......................... 5.21
Rear Stabilizer Bar (RZR S / RZR 4) ....................... 5.46
Rear Stabilizer Bar (RZR)....................................... 5.45
Reflash Authorization............................................. 4.51
Regulator / Rectifier Location................................ 10.30
Relays ................................................................ 10.27
Reprogramming Authorization ................................ 4.51
Rocker Panel Removal .......................................... 5.24
Rocker Panels (RZR / RZR S) ................................ 5.15
Rocker Panels (RZR 4) .......................................... 5.16

S

Safety Nets ............................................................. 5.9
Seat Assembly ...................................................... 5.13
Seat Belts / Mounting (RZR / RZR S)....................... 5.13
Seat Belts / Mounting (RZR 4) ................................ 5.14
Seats .................................................................... 5.21
Shift Cable Inspection and Adjustment ..............2.10, 8.3
Shift Lever .............................................................. 8.2
Shift Lever, Installation ............................................. 8.3
Shift Lever, Removal................................................ 8.2
Shock Piston Orientation, Walker Evans.................. 5.75
Shock Rebuilding Tools, FOX PODIUM Piggyback ... 5.54
Shock Rebuilding Tools, Walker Evans.................... 5.75
Shock Valve Shim Arrangement, Walker Evans ....... 5.75
Shock, FOX 1.5 PODIUM Piggyback, Exploded

View ................................................................... 5.50

Shock, FOX 2.0 Podium Top Fill, Exploded View ...... 5.62
Shock, FOX 2.0 PODIUM, Exploded View ............... 5.52
Shock, FOX PODIUM Piggyback, Rebuild

Information .......................................................... 5.54

Shock, FOX PODIUM Top Fill, Service .................... 5.62
Shock, FOX, Service (PODIUM Piggyback) ............. 5.50
Shock, Walker Evans 2.0, Exploded View................ 5.72
Shock, Walker Evans, Assembly............................. 5.78
Shock, Walker Evans, Disassembly ........................ 5.76
Shock, Walker Evans, Rebuild Information .............. 5.75
Shock, Walker Evans, Service ................................ 5.73
Shocks and Springs ............................................... 5.48
Software Version ................................................... 4.47
Solenoid, Rear Differential (INT’L)......................... 10.11

Spark Plug Service ................................................ 2.29
Special Tool, Cam Gear Installation Kit .................... 3.44
Special Tools........................................................... 1.5
Special Tools, Body/Steering/Suspension.................. 5.4
Special Tools, Brakes............................................... 9.4
Special Tools, Clutching ........................................... 6.3
Special Tools, EFI .................................................... 4.3
Special Tools, Electrical ......................................... 10.3
Special Tools, Engine............................................. 3.11
Special Tools, Final Drive ......................................... 7.3
Specification Chart, Maintenance............................ 2.19
Specification, Balance Shaft Gear Bolt Torque ......... 3.55
Specification, Cam Lobe Height .............................. 3.53
Specification, Cam Thrust Plate Fastener Torque ..... 3.55
Specification, Camshaft Gear Bolt Torque................ 3.55
Specification, Coolant Sensor Resistance ............. 10.24
Specification, Cylinder Head Warp .......................... 3.30
Specification, Cylinder Taper Limit .......................... 3.38
Specification, Cylinder Warp Limit ........................... 3.38
Specification, Oil Pump Bolt Torque ........................ 3.55
Specification, Oil Pump Rotor Clearance ................. 3.44
Specification, Timing Gear Alignment ...................... 3.44
Specification, Valve Seat Contact Width .................. 3.33
Specification, Valve Spring Free Length .................. 3.31
Specification, Valve Stem Diameter......................... 3.32
Specification, Valve Stem Guide I.D. ....................... 3.32
Specification, Wheel Toe-Out.................................. 2.33
Specifications, Camshaft........................................ 3.53
Specifications, Cooling System............................... 3.12
Specifications, Crankcase Fastener Torque ............. 3.55
Specifications, Engine.............................................. 3.3
Specifications, Engine Lubrication ..................3.17, 3.71
Specifications, Engine Oil Pressure......................... 3.17
Specifications, FOX 1.5 PODIUM Shocks................ 5.51
Specifications, FOX 2.0 PODIUM Shocks................ 5.53
Specifications, FOX 2.0 PODIUM Top Fill Shocks .... 5.63
Specifications, General ............................................ 1.6
Specifications, Oil Baffle Bolt Torque ....................... 3.55
Specifications, Oil Pick-Up Bolt Torque .................... 3.55
Specifications, Walker Evans 2.0 Shocks ................ 5.73
Speed Sensor ..................................................... 10.10
Speedometer ...................................................... 10.13
Standard Bolt Torque Specification ......................... 1.15
Starter Drive........................................................ 10.36
Starter Drive Removal............................................ 3.42
Starter Motor, Installation ..................................... 10.35
Starter Motor, Removal ........................................ 10.35
Starter Solenoid, Operation .................................. 10.36
Starter Solenoid, Test........................................... 10.36
Starter System, Troubleshooting ........................... 10.35
Stator, Removal..................................................... 3.43
Steering Shaft, Bearing Replacement...................... 5.26
Steering Shaft, Removal (Non-EPS) ....................... 5.26
Steering Wheel Freeplay ........................................ 2.31
Steering Wheel Removal (EPS) .............................. 5.30
Steering Wheel Removal (Non-EPS)....................... 5.26
Steering, Exploded View (Non-EPS) ....................... 5.25
Steering, Inspection ............................................... 2.31
Suspension, (FOX) ................................................ 2.35
Suspension, Compression Adjustment (FOX) .......... 2.36

Summary of Contents for RZR 800 2013





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RZR 800 2013

Wacker Neuson RD 12A Repair Manual preview
RD 12A
Brand: Wacker Neuson Pages: 138
Odes Industry UTV170-10 Maintenance Manual preview
UTV170-10
Brand: Odes Industry Pages: 73
McElroy TracStar 28 Operator'S Manual preview
TracStar 28
Brand: McElroy Pages: 63
E-TON Viper 150 Owner'S Manual preview
Viper 150
Brand: E-TON Pages: 118
Land Pride Gondo 4400EX Operator'S Manual preview
Gondo 4400EX
Brand: Land Pride Pages: 50
Seizmik 06016 Installation & Operation Manual preview
06016
Brand: Seizmik Pages: 10
Whirlwind Q4 User Manual preview
Q4
Brand: Whirlwind Pages: 7
Panther 55-0502 Installation And Operating Instructions Manual preview
55-0502
Brand: Panther Pages: 10
Polaris Sportsman 9921309 Owner'S Manual preview
Sportsman 9921309
Brand: Polaris Pages: 145
KMW 1220 Operator Installation & Parts Manual preview
1220
Brand: KMW Pages: 98
Bil-Jax ESCALATE TRAILER ET 12000 Operation And Service Manual preview
ESCALATE TRAILER ET 12000
Brand: Bil-Jax Pages: 20
Baja BA 250 Owner'S Manual preview
BA 250
Brand: Baja Pages: 82
Jeep compass 2017 Quick Reference Manual preview
compass 2017
Brand: Jeep Pages: 16
Kayo Bull AU Series User Manual preview
Bull AU Series
Brand: Kayo Pages: 33
KAYO MOTOR AU200 Maintenance Manual preview
AU200
Brand: KAYO MOTOR Pages: 138
Yamaha WOLVERINE 450 YFM45FXY Owner'S Manual preview
WOLVERINE 450 YFM45FXY
Brand: Yamaha Pages: 148
Yamaha PZ50W 2007 Technical Bulletin preview
PZ50W 2007
Brand: Yamaha Pages: 4
Yamaha RAPTOR 80 Owner'S Manual preview
RAPTOR 80
Brand: Yamaha Pages: 134

Brands by name

Popular brands

Load more brands