Polaris RZR 800 2013, Manual

Page: 214 / 500

5.24
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
Rocker Panels, Console and Floor
Rocker Panel Removal
1. Remove the push rivets and Torx screws retaining the
rocker panel and remove panel from the vehicle.
NOTE: If removing RH rocker panel from a RZR 4,
reinstall the gas cap once panel is removed.
Console and Lower Floor Removal (RZR / RZR S)
1. Remove both seats and rocker panels (see “Rocker
Panel Removal”).
2. Remove T27 screws retaining the console to the floor.
3. Remove shift handle knob and remove the console.
4. Remove the Torx screws retaining the upper floor to
the lower floor.
5. Remove the Torx screws retaining the rear portion of
the floor and remove the lower floor from the vehicle.
Rear Floor Removal (RZR 4)
1. Remove all four seats and both rocker panels (see
“Rocker Panel Removal”).
2. Remove the T27 screws retaining the console to the
floor.
3. Remove the shift handle knob and remove the
console.
4. Disconnect the battery and remove it from the
vehicle.
5. Remove the (8) fasteners that retain the lower
portion of the mid cab frame to the main frame.
6. Remove the (2) fasteners that retain the side bars to
the mid cab frame.
7. Remove the (8) fasteners that retain the upper
portion of the mid cab frame.
8. Using care, remove the mid cab frame from the
vehicle as an assembly.
9. Remove the Torx screws retaining the rear floor.
10. Disconnect the 12V outlet and ECU connector.
11. Remove the rear floor from the vehicle.
BODY / STEERING / SUSPENSION