Playnation Everest Extreme 1500MW, Instruction Manual

Page: 81 / 234

STEP10: ANGLE SUPPORTS
1: TWO 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE RIGHT SIDE OF THE PLAY
SET TO THE 2 X 6 BOTTOM PANEL BOARD. THE TOP OF THE ANGLE SUPPORT SHOULD BE FLUSH OR LOWER
THAN THE TOP OF THE DECK SUPPORT.
2: AT THE TOP USE 2-1/2" WOOD SCREWS THROUGH THE ANGLE SUPPORT INTO THE BOTTOM PANEL
BOARD. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE
SUPPORT TO THE CORNER POST.
3: TWO 2 X 4 X 18" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE REAR OF THE PLAY SET TO
THE REAR 2 X 4 DECK SUPPORT. THE TOP OF THE ANGLE SUPPORT SHOULD BE FLUSH OR LOWER THAN THE
TOP OF THE REAR DECK SUPPORT.
4: AT THE TOP USE TWO 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE ANGLE SUPPORT.
AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE SUPPORT TO THE
CORNER POST.
5: TWO 2 X 4 X 18" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE FRONT OF THE PLAY SET
TO THE FRONT 2 X 4 DECK SUPPORT. THE TOP OF THE ANGLE SUPPORT SHOULD BE FLUSH TO THE BOTTOM
SURFACE OF THE FRONT DECK SUPPORT.
6: AT THE BOTTOM USE TWO 2-1/2" WOOD SCREWS THROUGH THE ANGLE SUPPORTS INTO THE FRONT
POST. AT THE TOP USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE SUPPORT TO THE
BOTTOM OF THE FRONT DECK SUPPORT.
2-1/2" WOOD
SCREW
SUPPORT
ANGLE
2 x 4 x 18"
SUPPORT
ANGLE
2 x 4 x 13"
BOARD
PANEL
PANEL BOARD
2 X 4 BOTTOM
SCREW
3" WOOD
SCREW
2" WOOD SCREW
2" WOOD
SCREW
3" WOOD
2 X 6
BOTTOM
REAR DECK
SUPPORT
CORNER
18"
18"
18"
18"
13"
13"
POST
FRONT
FRONT
CORNER POST
SUPPORT
ANGLE
SUPPORT
2 x 4 x 18" ANGLE
SUPPORT
FRONT DECK
SCREW
3" WOOD
SCREW
3" WOOD
SCREW
SCREW
2-1/2" WOOD
2" WOOD SCREW
2" WOOD
SCREW
2-1/2" WOOD
PANEL BOARD
2 X 6 BOTTOM
CORNER POST
2 x 4 x 13"
FRONT
FLUSH
71