2" WOOD SCREWS
(REPEAT FOR OTHER END)
2-1/2" WOOD SCREWS
HOLE AS A GUIDE.
MIDDLE DECK SPACER
HERE USING THE
DRAW CENTER LINE
2 X 4 X 70"
CENTER DECK
SUPPORT
(NO HOLES)
STEP 12: CENTER DECK SUPPORT
1: FIND THE 2 X 4 X 70" CENTER DECK SUPPORT WITHOUT HOLES.
2: FROM THE UNDERSIDE OF THE DECK SPACERS THAT WERE PREVIOUSLY INSTALLED, PLACE THE
CENTER DECK SUPPORT AT THE CENTER OF THE DECK SPACERS (USE THE HOLE ON CENTER AS A
GUIDE) AND DRAW A LINE ON THE OUTSIDE OF THE FORT TO REPRESENT A CENTER LINE.
3: CENTER THE 2 X 4 X 70" CENTER DECK SUPPORT ON THE LINE AND PUSH THE CENTER DECK
SUPPORT FLUSH TO THE BOTTOM SIDE OF THE DECK SPACERS. USE 2" WOOD SCREWS TO
ATTACH THE DECK SPACERS TO THE CENTER DECK SUPPORT.
4: USING TWO 2-1/2" WOOD SCREWS, ATTACH THE 2 X 4 X 70" CENTER DECK SUPPORT
THROUGH THE OUTSIDE OF THE 2 X 6, AND INTO THE END OF THE CENTER DECK SUPPORT.
REPEAT THIS STEP ON THE OPPOSITE END OF THE FORT.
73
Summary of Contents for Everest Extreme 1500MW
Page 6: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 8: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 188: ...PART 2 CLATTER BRIDGE ASSEMBLY 178...
Page 217: ...APPENDIX 207...