Playnation Everest Extreme 1500MW, Instruction Manual

Page: 110 / 234

UPPER LEVEL
5/16" WASHER
5/16" X 4-1/2"
HEX BOLT
5/16" X 4-1/2"
5/16" WASHER
(3 HOLES ON CENTER)
RAILING BOARD
UPPER LEVEL STEPS/
2 X 4 X 70"
SUPPORT
3/8" X 5" LAG SCREW
3/8" WASHER
UNDER DECK
HEX BOLT
4 X 4 X 70"
2 X 6 X 70"
SANDBOX BOARD
(OFFSET UP)
STEP 37: UPPER LEVEL - RAILING & UNDER DECK SUPPORT
1: PLACE THE 2 X 4 X 70" UPPER LEVEL STEPS/RAILING BOARD (3 HOLES ON CENTER) AT THE TOP
OF THE REAR CORNER POSTS. THIS BOARD WILL GET ATTACHED TO THE 2ND HOLE DOWN FROM
THE TOP OF THE POSTS. THE T-NUT FOR THIS BOARD SHOULD BE ON THE INSIDE OF EACH POST
ALREADY. FASTEN THE UPPER LEVEL RAILING BOARD TO THE REAR CORNER POSTS WITH 5/16" X
4-1/2" HEX BOLTS AND 5/16" WASHERS.
2: PLACE THE 2 X 6 X 70" SANDBOX BOARD (OFFSET UP) AT THE BOTTOM OF THE REAR CORNER
POSTS. FASTEN THE TOP HOLES IN THE SANDBOX BOARD TO THE REAR CORNER POSTS WITH
5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS.
3: PLACE THE 4 X 4 X 70" UPPER LEVEL UNDER DECK SUPPORT DIRECTLY UNDERNEATH THE
UPPER LEVEL DECK SUPPORTS. ATTACH THE UNDER DECK SUPPORT TO THE REAR CORNER
POSTS WITH 3/8" X 5" LAG SCREWS AND 3/8" WASHERS.
100