Playnation Everest Extreme 1500MW, Instruction Manual

Page: 156 / 234

STEP 82: WALL PANEL SUPPORTS
1: PLACE THE 2 X 4 X 22.75" WALL PANEL SUPPORT LEFT ANGLED END ON TOP OF THE GABLE ASSEMBLY LEFT SIDE
AND THE OPPOSITE END WITH THE COUNTERSUNK HOLE FLUSH AGAINST THE LEFT FRONT CORNER POST. MAKE SURE
THE ANGLED END OF THE WALL PANEL SUPPORT IS FLUSH TO THE INSIDE OF THE ROOF PANEL. THE WALL PANEL
SUPPORT TOP EDGE MUST BE PARALLEL AT 21-7/8" TO THE TOP EDGE OF THE CONNECTOR POST. ATTACH THE
WALL PANEL SUPPORT LEFT TO THE ROOF PANEL WITH ONE #8 X 2-1/2" WOOD SCREW.
2: INSERT 5/16 X 3-1/2" LAG SCREWS AND 5/16" WASHERS INTO THE WALL PANEL SUPPORTS AND GABLE ASSEMBLY
COUNTERSUNK HOLES.
3: REPEAT SUB-STEPS 1 & 2 FOR THE OPPOSITE SIDE.
2 X 4 X 22.75"
SUPPORT RIGHT
WALL PANEL
2 X 4 X 22.75"
WALL PANEL
SUPPORT LEFT
A
SUPPORT LEFT
#8 X 2-1/2"
DETAIL A
5/16" WASHER
5/16" X 3-1/2" LAG SCREW WALL PANEL
CONNECTOR POST
WOOD SCREW
2 X 4 X 22.75"
LOWER LEVEL
ROOF
21 78 "
146