STEP 104: LOWER LEVEL FRONT CENTER POST
1: LOCATE THE 4 X 4 X 29" CENTER POST. PLACE THE 4 X 4 X 29" CENTER POST CENTERED BEHIND
THE HOLE IN THE FRONT TOP PANEL BOARD. CAREFULLY DRILL A 3/8" HOLE THROUGH THE
CENTER POST USING THE HOLE IN THE ROPE LADDER SUPPORT AS A GUIDE.
2: HAMMER A T-NUT INTO THE HOLE IN THE BACK SIDE OF THE CENTER POST. FASTEN THE CENTER
POST TO THE FRONT TOP PANEL BOARD WITH A 5/16" X 4-1/2" HEX BOLT AND A 5/16" WASHER.
3: SQUARE THE CENTER POST TO THE DECK. ATTACH THE CENTER POST TO THE FRONT FACE
BOARD WITH TWO #8 X 3" WOOD SCREWS FROM THE FRONT AND THREE #8 X 3" WOOD
SCREWS UNDER THE DECK.
PANEL BOARD
5/16" WASHER
FRONT TOP
HEX BOLT
T-NUT
5/16" X 4-1/2"
CENTER POST
4 X 4 X 29"
(2 AT FRONT)
FRONT FACE BOARD
#8 X 3" WOOD SCREWS
#8 X 3" WOOD SCREW
(3 UNDER DECK)
171
Summary of Contents for Everest Extreme 1500MW
Page 6: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 8: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 188: ...PART 2 CLATTER BRIDGE ASSEMBLY 178...
Page 217: ...APPENDIX 207...