Playnation Everest Extreme 1500MW, Instruction Manual

Page: 186 / 234

FLUSH
WOOD SCREW
PANEL BOARD
1 X 4 X 16.5" WINDOW
PANEL BOARD
1 X 4 X 21" WINDOW
PANEL BOARD
1 X 2 X 10" WINDOW BATTEN
#8 X 1-1/4" WOOD SCREW
#8 X 1-1/2" WOOD SCREW
1 X 4 X 24" WINDOW
#8 X 1-1/2"
PLAY SET
PANEL SLAT
STEP 109: WALL PANEL BOARDS
1: MOUNT THE 1 X 4 X 24" WINDOW PANEL BOARD NEXT TO THE 1 X 4 X 27" WINDOW PANEL BOARD INSTALLED ON
PREVIOUS STEPS. LEAVE A 1/4" GAP BETWEEN THEM. THE ANGLED END MUST BE OFFSET UP AND PARALLEL TO THE
ROOF SUPPORT.FASTEN IT USING FOUR #8 X 1-1/2" WOOD SCREWS.
2: MOUNT THE 1 X 4 X 21" WINDOW PANEL BOARD NEXT TO THE 1 X 4 X 24" WINDOW PANEL BOARD PREVIOUSLY
INSTALLED. LEAVE A 1/4" GAP BETWEEN THEM. THE ANGLED END MUST BE OFFSET UP AND PARALLEL TO THE ROOF
SUPPORT.FASTEN IT USING FOUR #8 X 1-1/2" WOOD SCREWS.
3: MOUNT THE 1 X 4 X 16.5" WINDOW PANEL BOARD NEXT TO THE 1 X 4 X 21" WINDOW PANEL BOARD PREVIOUSLY
INSTALLED. LEAVE A 1/4" GAP BETWEEN THEM. THE ANGLED END MUST BE OFFSET UP AND PARALLEL TO THE ROOF
SUPPORT. THE SQUARED END (WITH NO PREDRILLED HOLES) MUST BE RESTING ON TOP OF THE PLAY SET PANEL SLAT.
FASTEN IT TO THE ROOF SUPPORT USING TWO #8 X 1-1/2" WOOD SCREWS.
4: MOUNT THE 1 X 2 X 10" ROOF BATTEN
ABOVE THE PLAYSET PANEL SLAT
CENTERED ON TOP OF THE THREE PREVIOUS
WINDOW PANEL BOARDS AS SHOWN IN
THE DIAGRAM BELOW. MAKE SURE THE HOLES
ARE CENTERED ON EACH OF THE BOARDS
AND FASTEN IT USING THREE
#8 X 1-1/4" WOOD SCREWS.
REPEAT SUB STEPS 1 TO 4 FOR THE
OTHER SIDE.
EVEN
176