Playnation Everest Extreme 1500MW, Instruction Manual

Page: 194 / 234

STEP 6: REAR FRAME ASSEMBLY
1: PLACE THE 2 X 6 X 36-3/4" SANDBOX BOARD ON THE REAR OF THE CORNER POSTS. THE HOLES IN THE
SANDBOX BOARD SHOULD BE OFFSET DOWN.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE SANDBOX BOARD TO THE
T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
3: PLACE THE 2 X 4 X 36-3/4" TOP PANEL BOARD ON THE REAR OF THE CORNER POSTS.
4: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE HOLES OF THE TOP PANEL BOARD TO
THE T-NUTS INSTALLED ON THE CORNER POSTS.
5: DO NOT INSTALL LAG SCREWS AT THIS TIME.
A
TOP PANEL
(HOLES OFFSET DOWN)
B
D
2 X 4 X 36-3/4"
C
5/16" X 4-1/2"
5/16" WASHER
BOARD
SANDBOX BOARD
HEX BOLT
2 X 6 X 36-3/4"
FRONT OF
TOWER
184