Playnation Everest Extreme 1500MW, Instruction Manual

Page: 149 / 234

OVERLAP
ROOF STARTER FRONT
FLAT TOP END
FLUSH
(WIDTH IS ALMOST 4")
1-4-7688-RSF
1 X 4 X 76-7/8"
1 X 4 X 76-7/8"
ROOF STARTER REAR
1-4-7688-RSR
STEP 75: ROOF FRONT SECTION
1: PLACE THE 1 X 4 X 76-7/8" ROOF STARTER FRONT BOARD AT THE PEAK OF THE ROOF
OVERLAPPING THE ROOF STARTER REAR. THE HOLES IN THE ROOF STARTER FRONT SHOULD BE
CENTERED ON THE ROOF SUPPORTS, AND THE FLAT TOP END OF THE ROOF STARTER FRONT
SHOULD BE PLACED FLUSH TO THE TOP EDGE OF THE ROOF STARTER REAR.
2: FASTEN THE ROOF STARTER FRONT TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
3: PLACE THE 1 X 5 X 76-7/8" ROOF BOARDS ON TOP OF THE ROOF SUPPORTS, FITTING THE
TONGUE END INTO THE GROOVE END OF THE ROOF STARTER REAR. THIS SIDE OF THE ROOF
GETS SEVEN ROOF BOARDS.
4: FASTEN THE ROOF BOARDS TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
1 X 5 X 76-7/8"
ROOF BOARD
(SEVENTH ONE)
#8 X 1-1/2"
WOOD SCREW
1 X 5 X 76-7/8"
ROOF BOARD
(FIRST ONE)
1 X 4 X 76-7/8"
ROOF STARTER FRONT
139