STEP 74: ROOF REAR SECTION
1: PLACE THE 1 X 5 X 76-7/8" ROOF BOARDS ON TOP OF THE ROOF SUPPORTS, FITTING THE
TONGUE END INTO THE GROOVE END OF THE ROOF STARTER REAR. THIS SIDE OF THE ROOF
GETS FOUR BOARDS.
2: FASTEN THE ROOF BOARDS TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
3: PLACE THE 1 X 4 X 76-7/8" ROOF FINISHER AT THE END OF THE ROOF ASSEMBLY, AND FASTEN
WITH 1-1/2" WOOD SCREWS.
1 X 5 X 76-7/8"
ROOF BOARD
(FIRST ONE)
(FOURTH ONE)
1-1/2" WOOD SCREW
1 X 4 X 76-7/8"
ROOF FINISHER
1 X 5 X 76-7/8"
ROOF BOARD
ROOF STARTER REAR
138
Summary of Contents for Everest Extreme 1500MW
Page 6: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 8: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 188: ...PART 2 CLATTER BRIDGE ASSEMBLY 178...
Page 217: ...APPENDIX 207...