Playnation Everest Extreme 1500MW, Instruction Manual

Page: 168 / 234

LADDER.
MONKEY BAR ASSEMBLY FROM STEP 2
SIDE
COUNTERSUNK
HOLES ON TOP
MONKEY BAR PLATE
5/16" FLAT WASHER
MONKEY BAR ASSEMBLY.
STEP 2 SHOULD BE ON THE UNDER SIDE OF THE
MONKEY BAR
PLATE TO THIS
5/16" X 3-1/2" HEX HEAD BOLT
NOTE: SELF TAPPING SCREWS INSTALLED IN
ATTACH OTHER
NOTE: SELF TAPPING SCREWS INSTALLED IN
STEP 1 SHOULD BE ON THE UNDER SIDE OF THE
LADDER ASSEMBLY FROM STEP 1
1: LOCATE TWO 8-5/8" W X 6-1/2"H MONKEY BAR PLATES, EIGHT 5/16" X 3-1/2"L HEX BOLTS AND
EIGHT 5/16" FLAT WASHER. LOOSELY ATTACH THE LADDER ASSEMBLY TO THE MONKEY BAR
ASSEMBLY WITH THE MONKEY BAR PLATES. USE 5/16" X 3-1/2"L HEX BOLTS WITH 5/16" FLAT
WASHERS TO ATTACH THE MONKEY BAR PLATES TO THE T-NUTS PREVIOUSLY INSTALLED.
2: ONCE ALL THE HEX BOLTS ARE STARTED IN THE T-NUTS TIGHTEN THEM DOWN.
NOTE: THE SELF TAPPING SCREWS INSTALLED IN STEPS 1 & 2 SHOULD BE FACING THE BACK SIDE
OF THE LADDER ASSEMBLY AND THE UNDER SIDE OF THE MONKEY BAR ASSEMBLY.
STEP 92: ATTACHING THE LADDER TO THE
MONKEY BAR ASSEMBLY
158