Playnation Everest Extreme 1500MW, Instruction Manual

Page: 118 / 234

STEP 45: SLIDE POST ASSEMBLY
1: PREDRILL TWO 1/8" PILOT HOLES CENTERED VERTICALLY ON THE NOTCH IN THE 4 X 4 X 43-1/2"
RAD RIDE CENTER POST.
2: PLACE ONE END OF THE 5/4 X 4 X 25" RAD RIDE DECK SPACER INTO THE NOTCH IN THE RAD
RIDE CENTER POST. THE END WITHOUT ANY PREDRILLED HOLES GOES INTO THE NOTCH.
3: FASTEN THE RAD RIDE DECK SPACER TO THE RAD RIDE CENTER POST WITH TWO #10 X 3-1/2"
WOOD SCREWS.
5/4 X 4 X 25" RADRIDE
DECK SPACER
PILOT HOLE
ON THE NOTCH
CENTERED VERTICALLY
#10 X 3-1/2" WOOD SCREWS
NOTCH
PREDRILL TWO 1/8"
END.
WHEN YOU
RECEIVE THIS
BOARD IT WILL
HAVE TWO HOLES
PREDRILLED IN THIS
4 X 4 X 43-1/2" RAD RIDE CENTER POST
108