T-NUT
3/8" X 5"
3/8" WASHER
LAG SCREW
2 X 6 X 70"
BACK PANEL BOARD
T-NUT
HERE THAT THE LEFT
ONE DOES NOT HAVE
4: CENTER EACH LAG POST DIRECTLY OVER THE CENTER OF THE MIDDLE CORNER POSTS.
STEP 35: LAG POSTS
WASHERS.
5: ATTACH EACH LAG POST TO THE MIDDLE CORNER POST WITH 3/8" X 5" LAG SCREWS AND 3/8"
4 X 4 X 60-1/4"
LAG POST - RIGHT
LAG POST - LEFT
4 X 4 X 60-1/4"
1: TWO 4 X 4 60-1/4" LAG POSTS WILL BE USED TO EXTEND THE MIDDLE CORNER POSTS TO
ACCEPT THE UPPER LEVEL ROOF.
2: MAKE SURE TO INSTALL THE T-NUTS INTO THE LAG POSTS TOP HOLES AS SHOWN IN THE
DRAWING BELOW BEFORE MOUNTING IT TO THE MIDDLE POSTS.
3: REST THE BOTTOM OF EACH LAG POST ON TOP OF THE 2 X 6 X 70 BACK PANEL BOARD.
THIS POST HAS A HOLE
98
Summary of Contents for Everest Extreme 1500MW
Page 6: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 8: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 188: ...PART 2 CLATTER BRIDGE ASSEMBLY 178...
Page 217: ...APPENDIX 207...