WARNING
Due to improper operation!
Improper operation of the machine can result in serious injuries and
significant property damage!
•
Operating steps must be carried out in accordance with the instructions
in this operating manual!
•
Safety devices must not be bypassed, manipulated or turned off!
•
Changes to tools, materials or parameters must be monitored during the
process (monitored operation)!
•
Check the machine for obvious defects and integrity before switching on.
•
Eating, drinking and smoking are prohibited when handling cooling
lubricants or vacuumed substances!
•
Mobile phones may not be used in close proximity to the machine,
because interference of the CNC control cannot be excluded.
•
Keep traffic and escape routes clear!
WARNING
Risk of slipping!
A risk of slipping exists due to dust, material, oil or cooling lubricants on the
floor! Heavy parts or sharp tools may cause serious injuries!
•
Remove all soiling from the user's workstation immediately!
•
Clean the machine and workstation regularly!
•
Wear non-slip safety footwear!
•
Carry out regular employee training!
CAUTION
Be careful of hot surfaces on materials and tools!
Risk of burns on heated materials or tools after processing!
•
Check the temperature of components, materials or tools before they
come into contact with other items!
•
After machining, wait several minutes until the surfaces of components,
materials or tools have cooled down!
CAUTION
When switching the machine and the accessories on and off!
Incorrect switching on and off can cause a short!
The machine and accessories must always be switched on and off with the
respective master switch. Never use the mains plug as an on/off switch!
CAUTION
Loose tools or objects inside the machine!
Loose tools or objects in the interior of the machine can block or be
thrown around moving components of the machine. This can cause property
damage!
Before starting the machine, check the machine interior for loose and lying
objects!
7 For your safety
14 Planmeca PlanMill 60 S
User's manual
