8 System description
Planmeca PlanMill 60 S is a milling unit intended for the production of dental
indications and has been specially developed to satisfy the requirements
of the dental industry. Planmeca PlanMill 60 S is not suitable for the
application of conventional milling techniques. Planmeca PlanMill 60 S is
suitable for both for dry and wet processing using the materials listed in
section "Materials" on page 22.
The tool magazine can be equipped with up to 10 tools and the milling unit
kinematics enable simultaneous processing in 5 axes.
8.1 Materials
CAUTION
Processing other materials than those stated below is prohibited and
requires separate approval and permission from Planmeca. For further
information please contact your local Planmeca dealer.
CAUTION
The processing of highly flammable and inflammable materials is prohibited.
CAUTION
When processing titanium and other reactive materials, a general risk of fire
exists depending on the material! Perform an assessment to determine the
requirement for an automatic extinguishing system.
The following materials can be processed with PlanMill 60 S milling unit:
Dry processing
•
Zirconium dioxide
•
Plastics
•
Wax
•
Cobalt chrome
•
Composite
Wet processing
•
Lithium disilicate
•
Glass-ceramic
•
Titanium prefabricated abutments
Workpieces suitable for Planmeca PlanMill 60 S are available from
Planmeca. The workpiece diameters 98 mm and 98.5 mm have a 10 mm
step for clamping into the workpiece holder. Depending on the material,
workpieces up to a height of 30 mm can be machined.
For block materials and prefabricated abutments, appropriate workpiece
holders must be used. These are necessary to clamp other geometries in
the round workpiece holders.
8.2 Coolant lubricant
Only use coolant lubricant from Planmeca. The mixture ratio can be found in
the coolant lubricant description. For further information regarding handling
and disposal, refer to the separate safety data sheet, which you can request
from Planmeca customer service at any time.
8 System description
22 Planmeca PlanMill 60 S
User's manual
