Operating keys
1 Power button - blue
Pressing the power button switches on the machine's power
electronics. It is only possible to switch on the power electronics
if all safety-relevant electronic equipment is fully functional.
The power button must be pressed before starting the control
software or after a prompt from the control software.
2 Stop button - red
The stop button interrupts the movements of the machine. After
pressing the stop button, the power electronics are disconnected
from the power supply.
3 Protective door status display - white
The protective door status display lights up when the machine is not
moving and the protective door can be opened.
9.1.1 Light indicators
Light indicators on the socket (1) and in the milling chamber (2) display the
state of the milling unit.
Colour
Condition
Yellow
Initialisation of control software. The milling unit
performs a reference run.
White
Operational readiness.
Red
Fault.
Blue
The milling unit is processing a milling job.
9 Planmeca 60 S milling unit
User's manual
Planmeca PlanMill 60 S 25
