12 Switching milling unit on/off
12.1 Switching milling unit on
Steps
1. Press the on/off switch on the rear of the milling unit to switch the unit
on.
The light on the switch lights up and the switch is in the | position. Also,
the software starts up and is displayed on the touch screen.
2. When prompted by the software, press the power button on the milling
unit front to switch on the milling unit's power electronics.
A reference run is automatically initiated. The reference run is indicated
by a yellow light on the milling unit socket and the interior. Once the
reference run is completed, the light changes to white and the milling unit
is ready for operation.
3. If you are going to perform dry milling, activate the extraction system.
4. Ensure that the protective door is closed.
12.2 Switching milling unit off
Steps
1. Shut down the control software by pressing Options (three dots) > Shut
down on the touch screen.
2. Wait for the operating system to shut down completely.
3. Press the on/off switch on the rear of the milling unit to switch the unit
off.
The light on the switch goes off and the switch is in the 0 position.
4. Switch off the extraction system.
12 Switching milling unit on/off
User's manual
Planmeca PlanMill 60 S 37
