1 Introduction
1.1 Information regarding this manual
NOTE
Read this user’s manual through carefully before connecting, starting up and
using the milling unit. This user's manual must be read carefully, understood
and strictly followed.
NOTE
All instructions contained in this user’s manual, the safety instructions and
the accident prevention guidelines must be observed.
NOTE
As with all technical systems, it is only possible to guarantee the faultless
functionality and operational safety of this milling unit if the generally
applicable safety precautions and the special safety instructions in this user’s
manual are observed during its operation.
NOTE
This user’s manual must be kept throughout the entire service life of the
milling unit. It must be freely accessible to the personnel working on and with
the milling unit at all times, and it must be located in the immediate vicinity of
the milling unit.
This manual describes how to operate the Planmeca PlanMill 60 S milling
unit.
Despite every effort, it is not possible to fully exclude printing errors and
mistakes. We welcome any suggestions for improvements and information
regarding errors.
The information provided in this manual is based on a standard scope of
supply, with which the milling unit is operational.
The following documentation complies with the valid legal provisions,
regulations and ordinances, as well as standard engineering practice at the
time the milling unit was delivered.
Technical modifications and errors are reserved. Planmeca reserves the
right to modify any product listed here or the content of the user's manual
without prior notification.
1.2 Intended use
CAUTION
Any use of the milling unit that exceeds the intended use or deviates from
this is prohibited and is considered improper use. Any claims against the
manufacturer or their authorised representatives due to damages arising
from improper use of the milling unit are excluded. The user alone is liable
for any damages resulting from improper use.
CAUTION
All guarantee and warranty entitlements of the user against the manufacturer
or their authorised representatives are voided in case of improper use of the
milling unit. Any use other than intended use is prohibited!
1 Introduction
User's manual
Planmeca PlanMill 60 S 1
