7 For your safety
WARNING
Risk of personal injury due to a lack of diligence! With improper or
unintended use come:
•
Risk to life and limb
•
Risk of milling unit damage
•
Risk of further property damage
CAUTION
In order to avoid personal injury or property damage, always observe all
safety instructions!
The following section discusses points relevant to maintaining the highest
possible level of safety to personnel as well as to operating the unit safely
and error free.
Every person involved with operation of the system must have read and
understood the following safety instructions.
Notes, cautions and warnings
The following warning fields label hazards according to their risk level
(hazard level) and contain important safety-relevant information on handling
the milling unit. The information field contains (important) instructions and
additional information. Also always observe the generally valid accident
prevention regulations and the internal health and safety regulations.
WARNING
Danger with moderate degree of risk!
Provides information on hazards with a moderate degree of risk, which could
result in death or serious injury unless avoided.
CAUTION
Danger with low degree of risk!
Provides information on hazards with a low degree of risk, which could result
in minor or moderate injury unless avoided.
NOTE
Provides important information.
7.1 Safety equipment of milling unit
WARNING
You are at risk of serious injuries and even death if you remove or deactivate
the safety equipment!
•
Do not dismantle or manipulate the safety device!
•
Check correct function of safety devices on a regular basis!
•
Have damaged safety equipment repaired immediately!
7 For your safety
10 Planmeca PlanMill 60 S
User's manual
