WARNING
The combination of oil mist and air can produce a highly explosive mixture!
Therefore refrain from blowing out the milling unit with compressed air or
oxygen and avoid naked flames (smoking)! When cleaning the milling unit
never use flammable cleaning products as these can cause a milling unit
fire.
WARNING
In order to avoid an electric shock, do not insert objects into the machine.
The only exception is the intended replacement of parts in accordance with
this user's manual.
CAUTION
When cleaning the milling unit, only use suitable lifting aids and tools.
CAUTION
When cleaning the milling unit, your airways may be contaminated by gases
and dusts. Avoid inhalation of gases and dusts and always wear suitable
respiratory protection.
NOTE
Cleaning with compressed air is prohibited because fine dust can penetrate
the system mechanism damaging or destroying it.
17.3 Suitable cleaning products
CAUTION
Cleaning products can contain substances that are harmful to health. Always
observe the instructions of the respective manufacturer!
Only use suitable cleaning products to clean the milling unit. Never use
any abrasive, aggressive, caustic or flammable cleaning products. Cleaning
products can contain substances that are harmful to health. Observe the
instructions of the respective manufacturer in this regard.
Do not use cleaning agents that damage hoses, cables, seals, paints,
rubber, plastics and gaskets.
17.4 Surfaces
Clean the surfaces daily with a damp cloth and, if necessary, a suitable
cleaning product (liquid cleaner).
17.5 Protective door
NOTE
Never use abrasive cleaning products on the protective door. Only an
approved glass cleaning product must be used.
Clean the protective door daily so that the machining process can be
monitored.
17 Cleaning and maintenance
80 Planmeca PlanMill 60 S
User's manual
