16 Operating milling unit
CAUTION
The milling unit and components of the milling unit must only be operated
when in an operationally safe and technically faultless condition.
CAUTION
Operation of the milling unit is only permissible if the protective devices are
functioning correctly.
CAUTION
The milling unit must only be operated within the values specified in the
technical specifications. For reference, see section "Technical specifications"
CAUTION
The milling unit must be operated exclusively by authorised and trained
specialist personnel without physical limitations.
CAUTION
When operating the milling unit, always wear protective work clothing,
protective gloves, safety footwear, safety goggles and hearing protection.
16.1 Operating modes
16.1.1 Automatic mode
When the protective door is closed, the machine is in automatic mode. The
drives and machining spindle can only be actuated in this operating mode. A
program start can take place when the machine is in this state.
16.1.2 Setup mode
WARNING
In the milling unit’s set-up mode there is an increased risk of injury due to
sharp milling tools, protruding tools, sharp or pointed chips! Always wear
protective gloves and safety goggles when operating in setup mode!
A safety interlocking system monitors the milling unit's interior. If the
protective door is opened, the machine cannot be started and is in
setup mode. The drives and machining spindle cannot be actuated in this
operating mode. No program start can take place in this machine state. This
operating mode is used to load the machine with tools and workpieces.
During a milling process the protective door to the milling area is locked and
can only be opened when all axes and the machining spindle have come to
a standstill.
16 Operating milling unit
User's manual
Planmeca PlanMill 60 S 67
