Take the following measurements with a precision of 10 μm and send the
results to your local dealer to be inserted into the offset calculation program.
•
Position 2:
•
Position 5:
15.3.1.4 Calculation and data transfer
The offset values for the Planmeca PlanCAM software are determined after
the measurement results are entered into the calculation program.
Please contact the local dealer of your Planmeca PlanCAM software to
implement the offset data.
15.3.2 Medentika adapter
For instructions on fastening the screws, see "Attaching glass ceramic
15.3.2.1 General cleanliness and handling
The adapter has to be calibrated in the Planmeca PlanMill 60 S milling
unit before the first use to ensure an optimal positioning of the Medentika
system. Therefore the following aspects must be considered:
15 Adapters
60 Planmeca PlanMill 60 S
User's manual
