•
Cooling liquid 1000ml (10036920)
8.3 Milling tools
The tools approved by Planmeca for use in the Planmeca PlanMill 60 S
milling unit are listed in the table below.
WARNING
Only use tools that are approved by Planmeca or that have been
retrospectively approved. If unapproved tools are used there is a risk of
serious injury and substantial damage.
Please contact your local Planmeca dealer for the approval of other tools.
In order to process work-pieces, the milling unit must be equipped with at
least one tool. The appropriate and ready-ringed tools for the direct change
holder are available from your local Planmeca dealer.
Tool
numbe
r
Diameter/geometry
Material(s) to
be used with
Name on the user
interface
2
2.0 mm / Radius
Ti
2.0 mm Ti Radius
3
1.5 mm / Radius
Ti
1.5 mm Ti Radius
4
1.0 mm / Radius
Ti
1.0 mm Ti Radius
7
2.0 mm / Radius
CoCr
2.0 mm CoCr Radius
8
1.5 mm / Radius
CoCr
1.5 mm CoCr Radius
9
1.0 mm / Radius
CoCr
1.0 mm CoCr Radius
11
2.5 mm / Radius
PMMA/Wax
2.5 mm PMMA-Wax
Radius
12
1.0 mm / Radius
PMMA/Wax
1.0 mm PMMA-Wax
Radius
13
2.5 mm / Radius
Zr/Al
2.5 mm Zr-Al Radius
14
1.0 mm / Radius
Zr/Al
1.0 mm Zr-Al Radius
15
0.6 mm / Radius,
conical shaft
Zr/Al/
PMMA/Wax
0.6 mm Zr-Al-PMMA-
Wax Radius
17
1.5 mm / toric long shaft Zr/Al/
PMMA/Wax
1.5 mm Zr-Al-PMMA-
Wax SHAFT
21
2.5 mm / Radius
Glass ceramic 2.5 mm ceramic Radius
22
1.0 mm / Radius
Glass ceramic 1.0 mm ceramic Radius
23
0.6 mm / Radius,
conical shaft
Glass ceramic 0.6 mm ceramic Radius
31
3.0 mm / shaft milling
tool
PMMA
3.0 mm shaft milling
tool long
8 System description
User's manual
Planmeca PlanMill 60 S 23
