•
Persons who operate the machine must be at least 18 years of age.
•
During training, all persons - in particular those under the age of 18 -
must be supervised constantly.
•
The machine must be operated exclusively by authorised and trained
specialist personnel without physical limitations.
•
Responsibilities for the operation, maintenance and servicing of the
machine must be clearly stipulated and complied with.
•
Cleaning, maintenance and servicing work must only ever be carried out
when the machine is switched off.
•
The person using the milling unit should attend a training session of
at least one day before operation, in order to learn how to handle the
system safely and avoid erroneous use.
•
Before every milling process check that the workpiece is secure, so that
it cannot become loose during processing.
•
Before starting processing, always check that sufficient cooling lubricant
is present in the cooling lubricant tank. If the pump of the cooling
lubricant system should run dry, then this can lead to the destruction
of the pump.
•
Do not use running water for cooling/lubrication, but rather only a coolant
lubrication system with suitable cooling lubricant.
•
Every person involved with the installation, operation, maintenance,
repair or inspection of the machine must have read and understood all
the safety instructions.
•
In order to minimise ergonomic hazards, sufficient personnel must be
provided to operate the machine.
WARNING
Due to sharp-edged or pointed tools!
Risk of injury and death when reaching into the machine's interior!
•
Be aware of protruding tools!
•
Caution with sharp tools!
•
Never reach inside the machine until all components and tools are at a
complete standstill!
•
Wear protective gloves and safety goggles!
7 For your safety
User's manual
Planmeca PlanMill 60 S 13
