The general terms and conditions of Planmeca apply.
1.4 Accessories and modifications
The attachment of accessories to the Planmeca PlanMill 60 S milling unit
and any other modifications require the express permission of Planmeca.
All attachments and modifications that may affect the operational safety of
the milling unit are strictly prohibited and lead to the immediate voiding of
CE-conformity and the manufacturer's guarantee. As soon as such changes
are made to the milling unit, Planmeca accepts no liability whatsoever.
The EMC test only applies to the milling unit in its original configuration ex
works.
In general, the following is valid:
•
The milling unit may only be used exclusively in accordance with the
following user's manual. We accept no liability for damage caused by
use of the milling unit for any other applications.
•
The milling unit must only be operated with consumption materials
and the original accessories approved by Planmeca. The use of non-
approved consumables and accessories can cause damage to people,
milling units and materials. In these cases, we accept no liability.
•
If a change is made to the milling unit or components without the written
approval of Planmeca, the issued EC declaration of conformity becomes
invalid and we accept no liability with regard to injuries or damages
occurred to the milling unit.
1 Introduction
User's manual
Planmeca PlanMill 60 S 3
