13 Control software
When you switch on the milling unit, the control software starts automatically
and the
Jobs menu opens on the milling unit's touch screen.
13.1 Top bar
The top bar of the control software is always visible when the milling unit is
switched on.
1 Menu selection
2 Milling unit name
3 Date and time
4 Active menu item
5 Network
6 Interior temperature
7 Tool in collet
8 Options
13.1.1 Options
The
Options menu is opened by pressing the three dots (1) in the top bar.
Options contains the following items:
•
Shut down
Shuts down the milling unit.
•
Restart
Restarts the milling unit.
•
Help & Contact
Contains information for the support team to connect remotely to the
milling unit
•
Open log
Opens a log file where you can view all notifications/errors. The protocol
logs relevant events of the control software for diagnosis in the event of
problem cases.
•
Open web browser
Opens the web browser.
•
Check for updates
Requires Internet connection. Searches for updates for Smart Control
Dental Studio software.
•
Disable fullscreen
Disables full screen and allows to enter integrated PC running software.
This menu item is password-protected only for Planmeca approved
service technicians.
13 Control software
38 Planmeca PlanMill 60 S
User's manual
