Read all instructions in this manual before using this extractor.
WARNING
Mains voltage. Dangerous voltages exist in this equipment. Ensure all covers
are fitted before operating this equipment.
The unit is now ready for use.
A.3 Operation
A.3.1 Manual operation
The extraction unit is turned off and on by means of an illuminated rocker
switch on the front of the unit.
Filter condition signal – indicators and component controls
The LED on the front panel (see above Fig) indicate when the filter is
blocked.
The right switch will allow the vacuum motor to be either On/Off/Auto. Auto
will require a voltage input to the interface connector on the rear of the unit.
(see Fig 3)
A.4 Maintenance
User maintenance is limited to cleaning the unit and replacing the filters
with new. Only Planmeca trained maintenance technicians are authorised
to carry out component testing and replacement. Unauthorised work or
the use of unauthorised replacement filters may result in a potentially
dangerous situation and/or damage to the extractor unit, and will invalidate
the manufacturer’s warranty.
A.4.1 Cleaning unit
The powder coated finish can be cleaned with a damp cloth and non
aggressive detergent. Do not use an abrasive cleaning product as this will
damage the finish.
The cooling inlets and outlets should be cleaned once a year to prevent build
up of dust and overheating of unit.
A.4.2 Replacing filters
The filter package needs attention when the filter change LED is illuminated
or, when the unit no longer removes the fume efficiently.
Appendix A: Extraction system (optional)
102 Planmeca PlanMill 60 S
User's manual
