CAUTION
Unprofessional handling and improper use can lead to dangers and damage.
You must therefore carefully read and precisely follow this user’s manual
and the associated documents.
The Planmeca PlanMill 60 S milling unit is intended for the production of
dental indications and is specially developed to satisfy the requirements of
the dental industry.
Transport, installation, commissioning, operation and maintenance of the
system must be performed by instructed specialist personnel.
The milling unit is intended for dry and wet processing of the materials listed
in this user's manual.
The milling unit is designed for use in dry rooms (workshops, labs and
similar rooms) and industrial operations (for maximum ambient temperature
see section "Technical specifications" on page 91.
The unit may only be operated in a technically flawless and reliable
condition. Improper handling and use could cause danger to the users and
damage the unit.
Milling units from Planmeca are CE compliant and labelled accordingly.
For all other milling unit parts and components, for which the CE safety
guidelines are applicable, start- up is prohibited until all corresponding
requirements have been fulfilled. If a change is made to the system without
agreement with Planmeca, CE conformity is invalidated.
As soon as such changes are made to the milling unit, Planmeca accepts no
liability whatsoever.
The EMC test only applies to the milling unit in its original configuration ex
works.
1.3 Limitation of liability
All data, information and instructions in this user’s manual have been
provided under due consideration of applicable standards and regulations,
current engineering practice, as well as our many years of experience.
Planmeca assumes no liability for damage in the following cases:
•
Disregard of this user’s manual
•
Improper use
•
Deployment of untrained personnel
•
Unauthorised conversions
•
Technical modifications
•
Use of replacement parts or accessories that have not been approved by
Planmeca
The scope of delivery may vary from the explanations and representations
provided in this manual in the case of special versions, with technical
changes or if additional options are ordered. The obligations agreed in
the delivery contract, the general terms and conditions, as well as delivery
conditions of Planmeca and the statutory regulations valid at the time the
contract was concluded, apply.
Insofar as the exclusion of liability is legally permissible, Planmeca shall not
be liable for any loss or damage arising due to this product, regardless of
whether this is due to direct, indirect, special, collateral or consequential
damages, irrespective of the legal grounds, including guarantee, contract,
negligence or malice.
1 Introduction
2 Planmeca PlanMill 60 S
User's manual
