Port-Channel/LAG (802.3ad) Commands
8039_en_01
PHOENIX CONTACT
2-51
no port-channel
This command deletes a port-channel (LAG).
addport
This command adds one port to the port-channel (LAG). The first interface is a logical
slot/port number of a configured port-channel.
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical
slot/port number of a configured port-channel.
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a
logical slot/port number of a configured port-channel. To clear the port channels, see
“clear
port-channel” on page 22
.
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The
value range of <
key
> is 0 to 65535.
Format
port-channel
<name>
Mode
Global Config
Format
no port-channel
{<logical slot/port> | all}
Mode
Global Config
Note:
Before adding a port to a port-channel, set the physical mode of the port. For more information, see
“speed”
on page 3
.
Format
addport
<logical slot/port>
Mode
Interface Config
Format
deleteport
<logical slot/port>
Mode
Interface Config
Format
deleteport
{<logical slot/port> | all}
Mode
Global Config
Default
0x8000
Format
lacp admin key <
key
>
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx