SNMP Commands
8039_en_01
PHOENIX CONTACT
6-33
the community is disabled, no SNMP requests using this community are accepted. In this
case the SNMP manager associated with this community cannot manage the switch until the
Status is changed back to Enable.
no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP
requests using this community are accepted. In this case the SNMP manager associated with
this community cannot manage the switch until the Status is changed back to Enable.
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also
called public).
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also
called private).
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Default
•
private and public communities - enabled
•
other four - disabled
Format
snmp-server community mode
<name>
Mode
Global Config
Format
no snmp-server community mode
<name>
Mode
Global Config
Format
snmp-server community ro
<name>
Mode
Global Config
Format
snmp-server community rw
<name>
Mode
Global Config
Note:
For other port security commands, see
“Protected Ports Commands” on page 31
.
Default
disabled
Format
snmp-server enable traps violation
Mode
Interface Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx