System Utility and Clear Commands
8039_en_01
PHOENIX CONTACT
5-25
{xmodem |
tftp://<ipaddr|hostname>|<ip6address>/<filepath>/<filename>
|
sftp|scp://<username>@<ipaddr>|<ipv6address>|<filepath>|<filename>
}
For TFTP, SFTP and SCP, the
<ipaddr|hostname>
parameter is the IP address or host
name of the server,
<filepath>
is the path to the file, and
<filename>
is the name of the
file you want to upload or download. For SFTP and SCP, the <username> parameter is the
username for logging into the remote server via SSH.
Note:
<
ip6address
>
is also a valid parameter for routing packages that support IPv6.
Caution!
Remember to upload the existing FL SWITCH GHS Firmware.cfg file off the switch prior to loading a new
release image in order to make a backup.
Table 11: Copy Parameters
Source
Destination
Description
nvram:backup-config
nvram:startup-config
Copies the backup configuration to the startup configuration.
nvram:clibanner
<url>
Copies the CLI banner to a server.
nvram:errorlog
<url>
Copies the error log file to a server.
nvram:FL SWITCH GHS
Firmware.cfg
<url>
Uploads the binary config file to a server.
nvram:log
<url>
Copies the log file to a server.
nvram:script
<scriptname>
<url>
Copies a specified configuration script file to a server.
nvram:startup-config
nvram:backup-config
Copies the startup configuration to the backup configuration.
nvram:startup-config
<url>
Copies the startup configuration to a server.
nvram:traplog
<url>
Copies the trap log file to a server.
system:running-config nvram:startup-config
Saves the running configuration to nvram.
<url>
nvram:clibanner
Downloads the CLI banner to the system.
<url>
nvram:FL SWITCH GHS
Firmware.cfg
Downloads the binary config file to the system.
<url>
nvram:script
<destfilename>
Downloads a configuration script file to the system. During the
download of a configuration script, the copy command validates
the script. In case of any error, the command lists all the lines at
the end of the validation process and prompts you to confirm
before copying the script file.
<url>
nvram:sshkey-dsa
Downloads an SSH key file. For more information, see
“Secure
Shell (SSH) Commands” on page 11
.
<url>
nvram:sshkey-rsa1
Downloads an SSH key file.
<url>
nvram:sshkey-rsa2
Downloads an SSH key file.
<url>
nvram:sslpem-dhweak
Downloads an HTTP secure-server certificate.
<url>
nvram:sslpem-dhstrong
Downloads an HTTP secure-server certificate.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx