FL SWITCH GHS CLI
6-10
PHOENIX CONTACT
8039_en_01
telnetcon maxsessions
This command specifies the maximum number of Telnet connection sessions that can be
established. A value of 0 indicates that no Telnet connection can be established. The range
is 0-5.
no telnetcon maxsessions
This command sets the maximum number of Telnet connection sessions that can be
established to the default value.
telnetcon timeout
This command sets the Telnet connection session timeout value, in minutes. A session is
active as long as the session has not been idle for the value set. The time is a decimal value
from 1 to 160.
no telnetcon timeout
This command sets the Telnet connection session timeout value to the default.
Default
5
Format
telnetcon maxsessions
<0-5>
Mode
Privileged EXEC
Format
no telnetcon maxsessions
Mode
Privileged EXEC
Note:
When you change the timeout value, the new value is applied to all active and inactive sessions immediately.
Any sessions that have been idle longer than the new timeout value are disconnected immediately.
Default
5
Format
telnetcon timeout
<1-160>
Mode
Privileged EXEC
Note:
Changing the timeout value for active sessions does not become effective until the session is reaccessed.
Also, any keystroke activates the new timeout duration.
Format
no telnetcon timeout
Mode
Privileged EXEC
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx