Phoenix Contact FL SWITCH GHS 12G/8, User Manual, Page: 203 / 242

Hypertext Transfer Protocol (HTTP) Commands
8039_en_01 PHOENIX CONTACT
6-19
no ip http secure-port
This command is used to reset the SSL port to the default value.
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
show ip http
This command displays the http settings for the switch.
Format
ip http secure-port <portid>
Mode Privileged EXEC
Format
no ip http secure-port
Mode Privileged EXEC
Default SSL3 and TLS1
Format
ip http secure-protocol [SSL3] [TLS1]
Mode Privileged EXEC
Format
show ip http
Mode Privileged EXEC
Term Definition
HTTP Mode
(Unsecure)
The unsecure HTTP server administrative mode.
Java Mode The java applet administrative mode which applies to both secure and un-secure web connections.
Maximum
Allowable HTTP
Sessions
The number of allowable un-secure http sessions.
HTTP Session
Hard Timeout
The hard timeout for un-secure http sessions in hours.
HTTP Session Soft
Timeout
The soft timeout for un-secure http sessions in minutes.
HTTP Mode
(Secure)
The secure HTTP server administrative mode.
Secure Port The secure HTTP server port number.
Secure Protocol
Level(s)
The protocol level may have the values of SSL3, TSL1, or both SSL3 and TSL1.
Maximum
Allowable HTTPS
Sessions
The number of allowable secure http sessions.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx