Spanning Tree Protocol (STP) Commands
8039_en_01
PHOENIX CONTACT
2-9
•
Use 802.1d to specify that the switch transmits ST BPDUs rather than MST BPDUs
(IEEE 802.1d functionality supported).
•
Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionality
supported).
•
Use 802.1w to specify that the switch transmits RST BPDUs rather than MST BPDUs
(IEEE 802.1w functionality supported).
no spanning-tree forceversion
This command sets the Force Protocol Version parameter to the default value.
spanning-tree forward-time
This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the
value being greater than or equal to “(Bridge Max Age / 2) + 1”.
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value.
spanning-tree hello-time
This command sets the Admin Hello Time parameter to a new value for the common and
internal spanning tree. The hello time
<value>
is in whole seconds within a range of 1 to 10,
with the value being less than or equal to
(Bridge Max Age / 2) - 1
.
Mode
Global Config
Format
no spanning-tree forceversion
Mode
Global Config
Default
15
Format
spanning-tree forward-time
<4-30>
Mode
Global Config
Format
no spanning-tree forward-time
Mode
Global Config
Default
2
Format
spanning-tree hello-time
<1-10>
Mode
Interface Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx